Cattle Product Profile: EID Button Tags
01/18/2006 01:31PM
Bookmark
Subscribe
|
|
|
Allflex Reusable EID Tag
with Male Button :
|
Purchase Product
High Performance Reusable EID Tag
Can be reused to lower the per animal cost of EID
ISO Compliant
Packaged standard with Global Extended Small Male.
The EID tag is placed closer to the head of the animal, in a thicker part of the ear.
For this reason, a special male tag with an extended shaft is used.
|
Allflex Tamperproof White Half Duplex Tag:
|
Purchase Product
The EID tag holds a unique 21-digit number – the last 15 digits of the number are marked on the EID tag.
The reader reads all the numbers, but software determines how many are communicated to the data collection device.
The Allflex High Performance tags are ‘Passive’ rather than ‘Active’.
This means that they do not require a battery, but are powered by the signal sent by the reading device.
They will typically last the lifetime of an animal.
The tags are available in Tamperproof (white) or Reusable (yellow) and are fixed to the animal with an extended male button.
|
|
Allflex FDX Tamperproof Tag:
|
Purchase Product
General Description: This generation of Tamperproof EID Tag has a unique design that provides the ultimate in usability, security and retention. This single use tag features a hard plastic Tamperproof cap. Transponder numbers are laser marked in a circular format on the edge of the tag.
Full Duplex Technology (FDX) is utilized with the Bovine EID Tag. FDX is a design principle whereby the return signal initiates as soon as the beginning of the interrogation signal is received and the smoothing capacitor in the transponder has been charged. The return signal is received repetitively and without interruption for as long as a continuous interrogation signal is maintained. A FDX Transponder doesn’t have to store energy to be able to return its entire data signal.
Construction: The tag is yellow (1.20" Dia. X .17"Thick) injection molded Polyurethane female with a black plastic Injection molded tamperproof (Tete Rigid) cap. The hard cap of the Lightweight Ultra Bovine tag provides the highest degree of security available, as any attempt to remove the male tag from the female would cause the tag components to break, rendering them unusable.
|
Destron FDX-B Electronic Cattle e.Tag :
|
Purchase Product
Tamperproof Full Duplex (FDX-B) Electronic transponder designed specifically for the cattle industry but may be used on any large animal. The FDX-B technology is ideally suited for harsh environments where electrical noise, moisture, or large metal surfaces are present. The button style tag is an air coil molded into a high-grade polyurethane material. The tag is then sealed using a unique patented process developed by Destron technologies. All tags are identified with entire 15 digit numeric ID and a 2D bar code.
Approvals: ISO 11784 and ISO 11785
Construction: High-grade polyurethane.
All tags are manufactured in an ISO 9002 approved facility.
Frequency: 134.2 kHz
Read range: Up to 4feet at optimal tag orientation depending on antenna
Dimensions: 30mm diameter, 7 mm depth
Weight: 8 grams, 10 grams with stud.
|
Farnam Z-RFID Tag:
|
Purchase Product
Robust - Industry leading read distance - up to several feet.
* ICAR Approved - International Committee for Animal Recording, the worldwide organization of animal recording and productivity evaluation.
ISO Compliant - Conforms to standards established by the International Organization for Standardization. The world’s largest developer of standards.
Tamperproof - Ensures security in livestock management programs.
Durable - Guaranteed to last the life of the animal.
Designed to protect technology inside.
Dependable - 100% performance guaranteed.
Easy to Apply - Patented application significantly reduces the risk of ripped & torn ears.
Self-Piercing Tip - Ensures retention, may significantly reduces the risk of infection & disease transfer.
|
Y-TEX ISO TechStar™ II Tag:
|
Purchase Product
The Y-TEX TechStar II is an ISO compliant RFID tag that employs full-duplex technology. It is encapsulated in a soft polyurethane material and is intended to be used as livestock ID where exposure to various weather environments, liquids and temperature changes are significant. The tag derives its power from the reader’s electromagnetic field. Each tag contains its own unique code. Numerical visual identification can be hot stamped or laser printed on the tag. Each tag and button weighs only 10.35 grams, making it safe to apply to very young livestock. The tags are applied using the Y-TEX UltraTagger® with the Y-TEX button and the patented Snap-Lok™ collar for superior retention.
|
|
|