Increased production of U.S. domestic crude oil, particularly light sweet crude from tight oil formations in Texas and North Dakota, has been replacing imports of foreign light crude oil processed by U.S. Gulf Coast refineries. With Gulf Coast imports of heavier crude oil remaining steady, this shift in light crude supply from imports to domestic production has changed the average quality of crude oil imported into the U.S. Gulf Coast (PADD 3).
One of the primary characteristics that distinguishes different grades of crude oil is density, or how light or heavy the oil is. Crude oil density is typically measured as American Petroleum Institute (API) gravity, which is a scale expressing the specific gravity, or density, of liquid petroleum products in degrees; the higher the API gravity, the lighter the crude oil.
Since 2007, as domestic production of light sweet crude has increased, overall crude imports have fallen and become, on average, heavier. The average API gravity of crude imports processed in PADD 3 has dropped from more than 28° API to less than 27° API (Figure 1). This move to a higher percentage of heavier oil imports accelerated in 2011 when volumes of domestic light sweet crude oil production increased significantly, reducing the need for imports. Going forward, the growing production of domestic light crude may strain the capability of refineries to balance crude slates by reducing light crude imports and may put downward pressure on light crude prices on the U.S. Gulf Coast. Normally, light crude warrants a premium over heavier crude.
The volume of imported light crude oil (API gravity greater than 35°) (Figure 2) has decreased since 2010 to make room for the increasing volumes of light crudes from Eagle Ford (Texas) and Bakken (North Dakota) tight oil plays as well as for additional light sweet crude moving down the Seaway pipeline from Cushing, Oklahoma. While the absolute volume of imported heavy crude oil (API gravity less than 25°) has decreased since 2010 as well, the volume of heavy crude imports as a percentage of total PADD 3 imports has increased from 44 percent in 2010 to 47 percent in 2012.
The increased light sweet crude oil production from the Eagle Ford and Bakken fields has primarily displaced foreign light crudes from Africa. In total, light crude imports processed in PADD 3 have decreased to less than 0.7 million barrels per day (bbl/d) for the first half of 2012 from an average of 1.2 million bbl/d in 2010 (lowering the light crude imports to PADD 3 to 15 percent from 22 percent). To maintain a balanced crude slate with increased light crude availability, refiners have reduced imports of light crude and replaced them with domestic production. Imports of heavy crude processed in PADD 3 have continued as much of the heavy crude is either under long-term contract, is processed in equity refineries, or is needed to blend with domestic light crudes to balance the refinery crude slate.