Check corn for mycotoxins

 Resize text         Printer-friendly version of this article Printer-friendly version of this article

BROOKINGS, S.D. - The recent cool, wet weather has created concerns about the growth of molds and mycotoxins in corn still out in the field. Depending on the type of mold, this could have a significant impact on pork producers, said Bob Thaler, SDSU Extension Swine Specialist.

"Producers need to keep a couple of things in mind. First, molds don't cause the problem for livestock, it's the mycotoxins the molds produce that cause problems. Even if the corn is dried down after harvest to prevent any further mold growth, the mycotoxins that were initially on the corn in the field are still there and active," Thaler said.

He further explained that not all mycotoxins cause problems for livestock. Indicating that the ones swine producers need to watch for in swine are aflatoxin, zearalenone, vomitoxin (also known as DON), fumonosins and T2.

"With our current weather conditions, the main ones pork producers need to watch for are DON and zearalenone," he said.

DON does not cause health or reproductive problems, but Thaler said when the total concentration in the diet reaches 1 part per million (ppm), pigs will eat less feed. This decrease in feed intake will result in slower gains but not death.

"Zearalenone has estrogen-like effects and tends to cause problems in the breeding herd. It should be limited to 1 ppm in nursery diets, 2 ppm in sow and grower diets, and 3 ppm in finishing diets," he said.

There are some commercial products available that bind aflatoxin, but they are not consistently effective in completely controlling DON or zearalenone. Therefore, Thaler said if a producer wants to use DON or zearalenone-contaminated grain, they'll need to blend it with "clean" grain to keep those levels in the complete feed below 1 ppm.

"For example, if the corn contains 2 ppm DON and it is included in the diet at 25 percent of the total ration, the final diet should only contain .5 ppm DON if the other ingredients are clean," he said. "At this level, pig performance will not be affected. Also, they may want to consider adding a mold inhibitor to the corn they are storing on-farm. For producers with good quality "carry-over" corn, they should strategically feed that to their breeding herd and newly weaned animals, and use the poorer quality grains for older, market animals."

Sample grain

To properly blend mycotoxin contaminated corn, Thaler said it is essential to know exactly how much mycotoxin and what type is in the grain. To properly sample your grain, take samples from several different locations in the bin or load, and then send them in a cloth bag to a certified lab for analysis.

Once the sample results are in, blend the contaminated grain with clean grain and keep the diet's mycotoxin level below the recommended level.



Comments (0) Leave a comment 

Name
e-Mail (required)
Location

Comment:

characters left


MECHRON 2200

Powerful, strong, fast and comfortable, there’s a reason why the KIOTI Mechron 2200 is called the Ultimate Transport Vehicle™. Featuring ... Read More

View all Products in this segment

View All Buyers Guides

Feedback Form
Leads to Insight